Firstly, need to make sure that all of your fixtures are the same distance from the stage that you are lighting, and hopefully spread out horizontally and evenly to be at the 45 degree angle for 2-point front lighting. Then you need to make sure that all fixtures have the same lenses or beam angle- so that they have the same brightness by time they get to the stage! This is the first step to insuring a good, even wash.

Secondly, position the lights in a 2-point layout for each zone on stage. Depending on the lens used and the size of your stage, you may have anywhere from 2-10 zones across your stage area. Once hung, focus your lights one at a time, making up zones across the stage that are symmetrical on either side of center.

If you are also focusing color washes, use this same approach to make them look consistent to each other for when you mix and switch colors. Keep in mind that this approach works with any type of fixture, and you can mix fixtures in different washes- using ellipsoidals for white and led par pars for your colors, for example.

Welcome to visit www.hcstagelighting.com to check more wall washer lights.